filMAKER 182 GAS/NO GAS

Portable welding machine with inverter technology for wire welding.
Adjustment range: 10 to 150 amperes.
With filMAKER 182 you can weld both with GAS and without GAS (with flux cored wire).

Why choose filMAKER 182?

It is simple.
The control panel is intuitive so it is even easier to set welding parameters. Even if you never welded.

Errors minimized.
Synergistic mode automatically sets wire speed and tension-you just select the thickness to be welded on the front panel. With this automatism you can reduce welding machine adjustment errors and do a better job.

It is for everyone.
This welding machine is also ideal for inexperienced welders-so everyone can get great results.

Even safer.
With filMAKER 182, you don’t have to worry about power surges. Internal protection systems go into action in case of overvoltage and overcurrent.

To weld anywhere, anytime.
You can also use this welder with motogenerators (properly sized for use).

Write to us at info@helvilite.com or on our social: we will answer all your questions about filMAKER 182.

filMAKER 182 is assembled in Italy, in the factories of HELVI S.p.A.
helviLITE® is a trademark owned by HELVI S.p.A.

Accessories included

2-meter long welding flashlight
Ground cable. Length 2 meters.
Cable section 10mm2
Coil of flux-cored wire with diameter 0.9 mm - 0.5Kg
Disposable cylinder support kit
Martobrush: hammer and brush in one tool.
To perfect welding.